Posted on Leave a comment

DE Error Code in IFB Top Load Washing Machine

DE Error IFB Top Load Washing Machine

” My IFB Top Load Washing Machine Showing DE Error Code After Water Filled in The Washing Machine. This DE Error Code Also Displaying If I Selecting Direct Spin Option. Hence I am unable to Wash or Dry My Clothes. How to Solve This Issue?”

Question/Problem

Answer/Solution:

Sometimes IFB top load washing machine showing DE error code. This is not a big issue. IFB top load washing machine comes with safety features like door lock system, which is useful for child safety. But due to some reasons this function not working and shows DE error code.

So in this blog, I’m telling you how to solve this problem. Follow the below steps and you will get your IFB Top Load washing machine working back!

Step #1

Check the Door Switch Connector: Open the back cover. Check any carbon on the connector of the door switch, if there are any carbon particles then clean it. to clean the carbon particles properly use a toothbrush and IP liquid.

Now please check the washing machine by restarting it. May be your problem is being solved.

If still showing DE Error Code in your IFB Top Load Washing Machine then follow the next step.

Step #2

Check the Door Hinges: Observe carefully for any damage to hinges. Change the door if hinges are broken. Also, check the switch hinges and observe carefully for any damage to hinges. Change the switch if hinges Broken in your IFB Top Load washing machine.

Now after changing the particular part, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #3

Check the Door Switch Continuity: Check the door switch continuity by using a multimeter, must show continuity if the door is closed. change the door switch if continuity not showing.

After changing the Door Switch, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #4

Check the Wire Harness: Open the front panel. Check the wiring continuity between the door switch connector and the PCB connector. If continuity not showing, then change the wiring with connector or you can also change the entire wire harness.

After changing the wiring or entire wire harness, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #5

Repair or Replace the PCB: If the above four testings found ok, then need to repair or replace PCB with the new one. Now your problem solved definitely!

Please note that sometime your IFB Top Load washing machine problem will be solved in any of the one-step or some time it will need two or more steps also.

If you still have doubts ask me in the comment. Also, share your feedback or suggestions in the comment box. You may also watch my Youtube video for better understanding.

Posted on Leave a comment

DE Error Code in Videocon Top Load Washing Machine

DE Error Videocon Top Load Washing Machine

” My Videocon Top Load Washing Machine Showing DE Error Code After Water Filled in The Washing Machine. This DE Error Code Also Displaying If I Selecting Direct Spin Option. Hence I am unable to Wash or Dry My Clothes. How to Solve This Issue?”

Question/Problem

Answer/Solution:

Sometimes Videocon top load washing machine showing DE error code. This is not a big issue. Videocon top load washing machine comes with safety features like door lock system, which is useful for child safety. But due to some reasons this function not working and shows DE error code.

So in this blog, I’m telling you how to solve this problem. Follow the below steps and you will get your Videocon Top Load washing machine working back!

Step #1

Check the Door Switch Connector: Open the back cover. Check any carbon on the connector of the door switch, if there are any carbon particles then clean it. to clean the carbon particles properly use a toothbrush and IP liquid.

Now please check the washing machine by restarting it. May be your problem is being solved.

If still showing DE Error Code in your Videocon Top Load Washing Machine then follow the next step.

Step #2

Check the Door Hinges: observe carefully for any damage to hinges. Change the door if hinges are broken. Also, check the switch hinges and observe carefully for any damage to hinges. Change the switch if hinges Broken

Now after changing the particular part, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #3

Check the Door Switch Continuity: Check the door switch continuity by using a multimeter, must show continuity if the door is closed. change the door switch if continuity not showing.

After changing the Door Switch, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #4

Check the Wire Harness: Open the front panel. Check the wiring continuity between the door switch connector and the PCB connector. If continuity not showing, then change the wiring with connector or you can also change the entire wire harness.

After changing the wiring or entire wire harness, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #5

Repair or Replace the PCB: If the above four testings found ok, then need to repair or replace PCB with the new one. Now your problem solved definitely!

Please note that sometime your washing machine problem will be solved in any of the one-step or some time it will need two or more steps also.

If you still have doubts ask me in the comment. Also, share your feedback or suggestions in the comment box. You may also watch my Youtube video for better understanding.

Posted on Leave a comment

PE Error Code in LG Front Load Washing Machine

PE Error LG Front Load Washing Machine

“My LG Front Load Washing Machine Showing PE Error Code. This Error Showing When I am Pressed Power On Button of the Washing Machine. How to Solve This Problem?”

Question/Problem

Answer/Solution:

Sometimes LG Front Load Washing Machine Showing PE Error Code. This Error Code Indicates That Pressure Sensor (Water Level Sensor)  Not Working or PCB Unable to Detect Pressure Sensor.

So, in This Case, I am Explaining to you How to Solve This Issue. Please go With Step by Step:

  • Step #1
  • Remove the washing machine power plug for 1 minute.
  • After 1 minute plug the washing machine back into the power board.
  • Try to restart the washing cycle.
  • Most chances that your LG front load washing machine PE error has gone!

If washing machine still showing error after step #1, then please follow the second step:

  • Step #2
  • Remove the connector/socket of the pressure sensor.
  • Check if any debris or carbon on the connector/socket.
  • Clean all the debris or carbon with toothbrush and IP liquid.
  • Reconnect the connector/socket & try to restart the washing machine.

If washing machine still showing error after the step #2, then please follow the third step:

  • Step #3
  • Check the wire harness for any rat bites or damage.
  • Set the multimeter on continuity testing and check connectivity between pressure sensor connector & PCB connector.
  • If there is rat bite, damage or no continuity between connectors then change the wire harness.
  • Reconnect the connector/socket & try to restart the washing machine.

If the washing machine still showing error code, even following after all the above three steps. Then need to replace Pressure Sensor (Water Level Sensor)

Generic Pressure Sensor for LG Front Load Washing Machine available on our website. Please check and order this part. If you need more help regarding this issue, then please watch our youtube video. If you still have an issue regarding this issue, then please let me know in the comments. Also, write your opinion and feedback in the comment section.

Posted on Leave a comment

IE Error or 1E Error in LG Front Load Washing Machine

IE Error or 1E Error LG Front Load Washing Machine

“My LG Front Load Washing Machine Showing IE Error Code or 1E Error Code. This Error Appears Mostly Within One or Two Minute After Pressing The Start Button. How Can i Solve This Problem?”

Question/Problem

Answer/Solution:

Sometimes the LG front load washing machine is showing the IE error code or 1E error code, so there are some reasons why machines showing IE error code or 1E error code. The IE error code on the LG front load washing machine display is indicating water did not fill in the washing machine or water not filling within the preferred programmed time. This malfunctioning maybe happens due to a faulty water inlet valvebent or clogged water inlet pipeif water tap closed or not fully openedor it is damaged or carbon in the wiring harness. All these issues can cause your LG front load washing machine to display the error.

So, in this case, I will explain to you how to check and how to fix this issue:

  1. If the water tap is closed or not fully opened then the washing machine shows this error, so please check and ensure this.
  2. If there is no fault in step one, then Check for water inlet pipe not bent, clogged or leaked. If there is bent then clear this by straightening the pipe. If they’re clogged then clear this by passing the water with pressure from one side to another. If it is leaked or damaged, then replace the inlet pipe with the new one.
  3. If there is no fault in step two, then check for water inlet filter. Remove this filter by nose pliers, and clean it under the water tap pressure with the help of a toothbrush.
  4. If there is no fault in step three, then check for wire harness. Observe carefully is there any rat bites or damage in the wire harness. Also, check wire harness continuity between the inlet valve to the PCB. If there is no continuity, then replace the wire harness.
  5. If there is no fault in step four, then finally need to replace the inlet valve with the new one.

You can buy a water inlet valve for your LG front load washing machine from our website

If you still have an issue regarding this issue, then please let me know in the comments. Also, write your opinion and feedback in the comment section. You can also watch my video regarding this issue.

Posted on Leave a comment

DE Error Code in Samsung Top Load Washing Machine

DE Error Samsung Top Load Washing Machine

” My Samsung Top Load Washing Machine Showing DE Error Code After Water Filled in The Washing Machine. This DE Error Code Also Displaying If I Selecting Direct Spin Option. Hence I am unable to Wash or Dry My Clothes. How to Solve This Issue?”

Question/Problem

Answer/Solution:

Sometimes Samsung top load washing machine showing DE error code. This is not a big issue. Samsung top load washing machine comes with safety features like door lock system, which is useful for child safety. But due to some reasons this function not working and shows DE error code.

So in this article, I’m explaining to you how to solve this problem. Follow the below steps and you will get your washing machine working back!

Step #1

Open the back cover. Check any carbon on the connector of the door switch, if there are any carbon particles then clean it. to clean the carbon particles properly use a toothbrush and IP liquid.

Now please check the washing machine by restarting it. May be your problem is being solved.

If still showing DE Error Code then follow the next step.

Step #2

Check the door hinges and observe carefully for any damage to hinges. Change the door if hinges are broken. Also, check the switch hinges and observe carefully for any damage to hinges. Change the switch if hinges Broken

Now after changing the particular part, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #3

Check the door switch continuity by using a multimeter, must show continuity if the door is closed. change the door switch if continuity not showing.

After changing the Door Switch, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #4

Open the front panel. Check the wiring continuity between the door switch connector and the PCB connector. If continuity not showing, then change the wiring with connector or you can also change the entire wire harness.

After changing the wiring or entire wire harness, please check the washing machine by restarting it. May be your problem is solved.

If still showing DE Error Code then follow the next step.

Step #5

If the above four testings found ok, then need to repair or replace PCB with the new one. Now your problem solved definitely!

Please note that sometime your washing machine problem will be solved in any of the one-step or some time it will need two or more steps also.

If you still have doubts ask me in the comment. Also, share your feedback or suggestions in the comment box. You may also watch my Youtube video for better understanding.

Posted on Leave a comment

4E Error Code in The Samsung Top Load Washing Machine

4E Error Samsung Top Load Washing Machine

“My Samsung Top Load Washing Machine Showing 4E Error Code. This Happens Within 5 to 10 Minutes after Starting the Wash Program. I Want to Know How to Solve This Issue?”

Question/Problem

Answer/Solution:

 4E Error Code in Samsung Top Load Washing Machine Indicates Below Basic Things
1. Water Filling Time is Taking Too Long
2. No Water Comes in the Washing Machine
3. Water Filling But Not Detecting
4. Water Filling Process and Water Drain Process Happens at the Same Time

In This Process, We Need to Replace Inlet Valve or Inlet Hose Pipe or Pressure Sensor or Drain Assembly or PCB Board.

Let’s see how to identify what is the exact issue and which spare parts we need to replace. Please go through the following process step by step.

Step #1
Check The Water Tap: Please Check is there water tap open or closed. Water will not fill if the water tap is not fully open. Because of this, you will get the 4e error code on display. So please open the washing machine water tap fully.
After this process may be your problem is solved! If not please follow the second step.

Step #2
Check The Inlet Hose Pipe: Please check is there any damage or leakage in the inlet hose pipe. If you found any damage or leakage, then replace the inlet hose pipe.
Also, check for any clogged in the inlet hose pipe. Follow the below steps for checking the clogging.
Remove inlet hose pipe from the washing machine side.
Turn on the water tap and see, water passing properly from the inlet pipe or not?
If water not passing or water passing but very slowly, then try to run this process for 5 minutes. If still water not passing properly, then replace the inlet hose pipe.
After this process may be your problem is solved! If not please follow the third step.

Step #3
Check The Inlet Filter: Remove the inlet filter with the help of nose plier and check for any dust or derby. If there is dust or derby, then water will not pass inside the machine and it will display 4e error code. Clean inlet filter with the help of a toothbrush and water.
After this process may be your problem is solved! If not please follow the fourth step.

Step #4
Check The Inlet Valve: Open the back top cover, and check the inlet valve.
Observe carefully is there any vibration in the inlet valve. If there is no vibration, it means the inlet valve is faulty.
Also, check the voltage with the help of a multimeter. If there is showing voltage properly, it also means that the inlet valve is faulty. It indicates that voltage is coming but the inlet valve not operating. In both cases, you need to replace the inlet valve.
After this process may be your problem is solved! If not please follow the fifth step.

Step #5
Check The Wire Harness: In the above step, if multimeter not showing voltage. It means that wire is internal damage or carbon particle available in the wire harness. We need to go with continuity testing with the help of a multimeter. So for this process, we need to open the front PCB panel also. Check the wire color code of the inlet valve. Capture the same color code in the PCB side connector. Take the continuity between both side connector. If continuity not showing it means there is a problem in the wire harness. So, in this case, you can replace the specific wire or entire wire harness.
After this process may be your problem is solved! If not please follow the sixth step.

Step#6
Check The PCB Board: In the above process if there is showing continuity between both connectors. But still not showing voltage on the inlet valve connector. It means the PCB board is faulty. So, in this case, we need to repair the PCB board or replace the entire PCB board.
After this process may be your problem is solved! If not please follow the seventh step.

Step #7
Check The Pressure Sensor Pipe: Sometimes water Filling properly in the washing machine. But still showing 4E error code in the Samsung top load washing machine. So it means water not detected by the pressure sensor. So, in this case, please open the back cover of the washing machine. If you found that pressure sensors pipe is detached from the washing machine tub, then place it in the right place. If there is damage on the pipe, then replace the entire pipe. If there is no problem in the pipe then we need to replace the pressure sensor or pressure switch.
After this process may be your problem is solved! If not please follow the Eighth step.

Step #8
Check The Drain Assembly: Sometime Water is filling in the Samsung top load washing machine but at the same time draining out also. So also in this situation the washing machine shows the 4E error code. So, in this case, we need to open the drain assembly and check for any derby, scaling, coin or any other things which are creating the gap for drain the water. So clean this with the help Of a toothbrush and water. If there is damage in the drain assembly rubber, then replace the entire drain assembly.
After this process may be your problem is solved! Please note any 1 or 2 steps will solve your 4E error code issue in the Samsung Top Load washing machine.

If you still have doubts related to this topic, then you can also watch our video about this topic.
If you have any questions or feedback, please ask me in the comment.

Thank You! Keep Loving! Keep Supporting!